Low-Producing Well Solutions & Emergency Water Pumps in Colorado Springs+
Are you constantly running out of water during peak usage times, or has your well pump suddenly stopped working? At Barnhart Pump Co., we understand that a reliable water supply is the lifeline of your home. Whether you are dealing with a historically low-producing well or facing a sudden loss of water pressure that requires emergency pump service, our trusted local experts are here to restore your water supply throughout Colorado Springs and the surrounding communities of El Paso County.
What Is a Low-Producing Well?
A low-producing well, also called a low-yield well, is a well that cannot supply water as fast as your household consumes it during peak usage periods. While many Colorado water wells provide adequate flow, properties across El Paso County, Elbert County, and the Pikes Peak region frequently sit above aquifers with naturally limited recharge rates. A well producing less than one gallon per minute (GPM) is generally classified as low-yielding, though even wells producing 2–5 GPM can fall short for larger households.
Understanding your well’s water well production rate is the first step toward finding the right solution.
Signs You May Have a Low-Producing Well:
- Your water pressure drops significantly after a period of time when multiple fixtures run at the same time — for example, showering while the dishwasher or washing machine is running.
- Your faucets sputter air after a period of time, indicating the pump has drawn the well nearly dry.
- You completely lose water and must wait several hours for the well to recover before water returns.
If you’re experiencing these symptoms, that doesn’t necessarily mean you need to drill a new well. Barnhart Pump Co. offers several effective, cost-efficient solutions designed to maximize your existing well’s performance.
Low-Producing Well Solutions from Barnhart Pump Co.
We specialize in customizing water systems to overcome the challenges of low-yielding wells. Our approach starts with a thorough water well inspection and flow rate test to determine your well’s true yield in gallons per minute, then we recommend the right solution for your specific situation.
Water Storage Cisterns and Reservoir Tank Systems
The most reliable long-term solution for a low-producing well is adding a water storage system. By installing a cistern or reservoir tank, your well pump can fill the cistern during all of the times water is not being used, maximizing the gallons per day the well can produce. When your household needs water, especially during peak demand times, a secondary booster pump delivers pressurized water from the storage tank directly to your home. The result is consistent water pressure and supply, even if your well only produces a fraction of a GPM. Say goodbye to the vicious cycle of running out of water, waiting for your well to recover, and dry-running your pump.
Pump Protection and Well Management Systems
Over-pumping a low-yield well can permanently damage your submersible pump. Pumps do not tolerate running without water and will overheat quickly. There is also the possibility of drawing fine sediment and air into your plumbing system. We install advanced pump dry run prevention control systems that monitor the load of the pump motor. Not as common but also an option, is a water level transducer inside your well casing that sends real time water level results back to a display within your home. These systems can automatically shut off the pump when or before the well runs dry and automatically restart the pump, protecting your equipment and allowing the aquifer adequate time to recharge between pumping cycles.
Constant Pressure System Upgrades
If your well produces sufficient water but struggles with delivery and pressure consistency, this may be an indication of a failing pump or an undersized pump. Upgrading to a larger pump and/or a constant pressure system can provide a city-like water pressure experience throughout your home. A variable-speed pump controller optimizes how your current well water is distributed, eliminating the pressure fluctuations that are common with conventional setups.
Emergency Water Pump Services in Colorado Springs
A failing well pump does not wait for the most opportune time to quit. When your well pump quits or your well production stops meeting your needs, it is a household emergency. Barnhart Pump Co. provides comprehensive well pump repair and replacement services across Colorado Springs and the greater El Paso County area to keep you comfortable in your home. Our office hours are:
- Monday-Friday: 7:00 a.m. – 5:00 p.m.
- Saturday: Emergency out-of-water services
- Sunday: Closed
When to Call for Emergency Pump Service
- No water at all. The most immediate sign of a failed pump, a failed control box, or a variety of other system components. Our technicians will diagnose the root cause and restore your water supply as quickly as possible.
- Loud, grinding, or rattling noises. Unusual sounds from your pressure tank area or an above ground jet pump indicates mechanical failure — often a worn motor bearing or a damaged impeller — that will worsen rapidly without attention.
- Rapid pump cycling. If your pump turns on and off every few seconds, your pressure tank is likely waterlogged. This condition places extreme stress on the pump motor and control box and will lead to complete failure if not addressed promptly.
- Sudden drop in water pressure. A dramatic and unexplained pressure drop often points to a failing pump, a broken pipe or leak somewhere in the system, or failing electrical controls.
Our technicians arrive fully equipped to diagnose the issue on-site, whether the repair requires a simple pressure switch replacement, a new pressure tank, or a complete submersible well pump installation.
Frequently Asked Questions
Turn off your well pump at the breaker immediately to prevent the motor from burning out by running dry. Wait several hours to allow the aquifer to recharge. If water does not return, call Barnhart Pump Co. at 719- 781-2533 to inspect for a failed pump, a bad pressure switch, or a well that has a low production issue.
The most effective solution is installing a water storage cistern or reservoir tank. Your well slowly fills the tank at its natural rate, and a booster pump delivers pressurized water to your home on demand. Depending on your water usage and number of people living in your home, this approach works for wells producing as little as 0.5 GPM and eliminates the frustration of running out of water.
A standard submersible well pump typically lasts 10 to 15 years under normal operating conditions. However, in a low-producing well without proper pump protection, frequent dry-running can reduce a pump’s lifespan to just a few years. Installing a pump protection system is one of the best investments you can make to extend pump life.
Sudden water loss is most commonly caused by a failed submersible pump, a tripped breaker, a faulty pressure switch, or a broken pipe. Less commonly, a well can temporarily run dry during periods of drought or heavy local groundwater demand. A professional inspection will identify the exact cause.
Yes. Barnhart Pump Co. provides emergency water pump repair and replacement throughout Colorado Springs, El Paso County, Elbert County, Douglas County, and the surrounding Pikes Peak region. Call us at 719- 781-2533 to speak with a technician.
Don’t Let a Low-Producing Well or a Broken Pump Disrupt Your Home
Whether you need a long-term solution for a low-yield well or immediate emergency pump service, Barnhart Pump Co. has the expertise and equipment to get your water flowing again.
We serve Colorado Springs and the surrounding communities, including Peyton, Falcon, Fountain, Elizabeth, Elbert, Woodland Park, and Castle Rock.
Call us at 719-781-2533 or contact us online to schedule a water well inspection or request emergency service.
Explore our related services: