FAQ
We have many frequently asked questions, just give us a call at 719-495-2912 and we would love to answer them!
Tips
Properly constructed private water well systems require little homeowner maintenance. These simple steps will help protect your system and investment.
- Always use licensed contractors when a well is constructed, a pump is installed or the system is serviced.
- Annual well maintenance, including a bacterial test is recommended. Any source of drinking water should be checked anytime there is a change in taste, odor or appearance, or anytime the system is serviced.
- Keep hazardous chemicals, such as paint, fertilizer, pesticides and motor oil far away from your well.
- Periodically check the well cover, seal or cap on top of the well casing to insure it is in good repair.
- Always maintain proper separation between your well and buildings, waste systems and chemical storage facilities.
- Prevent back-flow. When mixing pesticides, fertilizers or other chemicals, refrain from putting the hose inside the tank or container.
- When landscaping, keep the top of your well at least one foot above ground. Slope the ground away from your well for proper drainage.
- Take care in working or mowing around your well. A damaged casing could compromise the sanitary protection of your well. AVOID DUMPING SNOW, LEAVES, OR OTHER MATERIALS AROUND YOUR WELL.
- Keep your well records in a easy to find safe place. Including the construction report, permit and water well system maintenance / water testing results.
- Be aware of changes in your well, the area around your well, or the water it provides.
If you do experience a problem, or just have some questions, please give us a call at Barnhart Pump. We’ll be glad to help. 719-495-2912
